![]() The next step is where the methods differ. Once you have done this, slowly turn on the gas cylinder to 5 psi and check for any leaks in the line, at the liquid post or around the lid of the keg. The sockets are only designed to attach to their respective posts so doing this allows you to direct gas through the liquid post. Then, remove the black liquid socket from the liquid line and attach it to the gas line. To prepare the keg, first remove the gas socket from the gas line and set it aside in a safe place. This will increase the surface area between the CO2 bubbles and beer for a more efficient carbonation process. ![]() In carbonating, you want to do the opposite and directly send CO2 gas down through the dip tube so it will rise up through the beer. ![]() As gas flows in from the top of the keg, it helps build pressure within the keg to dispense liquid from the bottom of the dip tube all the way out the top and through the liquid line. The liquid post is attached to a dip tube that goes all the way to the bottom of the keg. Once you have installed the ball lock conversion kit, you’ll need to prepare the gas line for attachment to the keg.Ī Cornelius keg is built with two posts-one for gas and one for liquid. This is a simple procedure that allows you to connect the liquid and gas lines to your kegerators existing lines without sacrificing the ability to connect to standard ball bearing style kegs. Preparationįirst, you must install a ball lock conversion kit to your existing kegerator lines. ![]() This type of keg is by far the most common and recommended serving vessel for homebrewers when it comes to kegging their own beer. With both methods, we’ll assume that you are using a standard homebrewing-type Cornelius keg that is fitted with ball lock-style liquid and gas posts. There are two main methods for force carbonating a homebrew keg, both of which are very similar with the main difference being the amount of time it takes to carbonate. Proper keg post liquid & gas line fittings ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |